Valve linking kit

ISMA CONTROLLI valve linking kits are designed to connect a fan coil unit directly into a building’s chilled water or hot water network.
Each kit includes a built-in factory-assembled set of valves and accessories in order to reduce onsite installation and commissioning times and to prevent a potential future system leakage from fan coil unit systems. It may also include a balancing valve with pressure tests points, installed on a return line. All necessary components are installed as a single item, which is then 100% pressure-tested in the factory prior to delivery to site.
No specific tools are needed for installation. A built-in bypass section includes a full port isolating valve to enable coil and circuit flushing and cleaning to be carried out without a need to switch off the attached fan coil unit. Thermal insulation can be added too.
-
KTFC15 kit FCU 1/2"
Get a QuoteKit for fan coil with 1/2" external threaded connections, distance 40 mm
2 and 3 ways (strainer included)
PN16 (flexible hoses PN10)
FOR MORE INFORMATION AND CUSTOMIZATIONS CONTACT THE TECHNICAL SECRETARIAT Learn MoreOn request -
KTFC20 kit FCU 3/4"
Get a QuoteKit for fan coil with 1/2" external threaded connections, distance 40 mm
2 and 3 ways (strainer included)
PN16 (flexible hoses PN10)
FOR MORE INFORMATION AND CUSTOMIZATIONS CONTACT THE TECHNICAL SECRETARIAT Learn MoreOn request -
KTFC25 kit FCU 1"
Get a QuoteKit for fan coil with 1" external threaded connections, distance 80 mm
2 and 3 ways (strainer included)
PN16 (flexible hoses PN10)
FOR MORE INFORMATION AND CUSTOMIZATIONS CONTACT THE TECHNICAL SECRETARIAT Learn MoreOn request